✨ New Arrivals Just Dropped!Explore
HomeStore

EGR/DPF Delete 2011-2016 LML 6.6L Duramax All-in-One Kit

Product image 1
1 / 36
+31

EGR/DPF Delete 2011-2016 LML 6.6L Duramax All-in-One Kit

---tab Description---

Combining an EGR delete with a DPF delete comprehensively optimizes your 2011-2016 LML 6.6L Duramax diesel engine performance by eliminating two major restrictive emissions systems. This modification significantly improves power, efficiency, and engine longevity while reducing maintenance needs.

LML EGR&DPF Delete Kit Key Features

Power Increase

  • Removes exhaust backpressure from DPF, allowing turbo to spool faster
  • Eliminates EGR’s recirculated hot gases, reducing intake air temperatures
  • Typical gains: 15-30% more horsepower/torque (varies by tune)

Improved Engine Health

  • Prevents EGR soot buildup in intake manifold and valves
  • Stops DPF-related regen cycles that dilute engine oil with fuel
  • Reduces carbon deposits in combustion chambers

Enhanced Fuel Economy

  • No DPF regens wasting fuel (up to 2-3 MPG improvement)
  • Cleaner combustion without EGR’s oxygen-depleted air

Simplified Maintenance

  • Eliminates DPF filter replacements ($1,000+ savings)
  • No EGR valve/cooler failures to repair
  • Reduces oil change frequency (no soot contamination)

Thermal Management

  • Lower EGTs (exhaust gas temps) without EGR’s hot gas reintroduction
  • Reduced risk of turbo overheating during heavy loads

Specification

Exhaust Material T-409 Stainless Steel, it is magnetic.
Thickness 2mm thick for long-lasting durability and heat resistance.
Inlet Diameter  4.0"/5.0‘’
mandrel-bent construction Maximum flow efficiency, helping your diesel breathe easier

 

Installation

 2011-2016 LML 6.6L Duramax EGR Delete Instruction

 2011-2016 LML 6.6L Duramax DPF Delete Instruction

Tuner Required for Installation

Installing a LML 6.6L Duramx delete pipe requires more than just swapping out hardware. When removing of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting. Looking for a complete LML delete solution? Check out our full LML Delete Kit here.

---tab How to Choose---

How to Choose DPF Delete?

4” vs 5” Straight Pipe Comparison

When choosing a LML 6.6L Duramx delete pipe, the most common options are 4-inch and 5-inch straight pipes. The 4-inch straight pipe delivers a tighter, raspier exhaust note—especially noticeable at lower RPMs—making it ideal for daily driving or mildly tuned setups where excessive drone is undesirable. In contrast, the 5 inch straight pipe LML 6.6L Duramx offers a deeper, more refined tone with less high-pitch resonance. It excels in high-output builds and towing scenarios, where increased exhaust flow is beneficial.

Driver feedback suggests:

  • 4”straight pipe is great for stock-to-lightly-modded trucks and a quieter cabin
  • 5” straight pipe is perfect for aggressive builds, deeper tone lovers, or anyone maximizing exhaust performance

Different Types of DPF Delete

DPF Race Delete

  • Only removes the DPF (keeps stock downpipe)
  • Minimal performance gain but cheapest option
  • Best for budget-focused or emissions-testing avoidance

Downpipe-Back Delete

  • Replaces exhaust from the turbo downpipe backward
  • Improves mid-range power and throttle response
  • Good for street builds keeping stock turbo

Turbo Back Delete

  • Full system replacement from turbo outlet
  • Includes high-flow downpipe for maximum efficiency
  • Reduces turbo lag and boosts top-end power
  • Top choice for tuned/high-performance engines

Dual Exit (5" only)

  • Splits into dual exhaust paths
  • Enhances cooling and flow for extreme applications
  • Used in heavy towing or competition setups

Muffler vs. No Muffler

With Muffler

  • Tames exhaust noise for daily driving
  • Slight power restriction (~5-10HP)
  • More likely to comply with local noise laws

Straight Pipe (No Muffler)

  • Loud, aggressive exhaust note
  • Unrestricted flow for max horsepower
  • Often illegal for street use (noise/emissions)
  • Reserved for off-road/race applications

---tab Fitment---

  • 2011-2015 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • 2015.5-2016 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • Does NOT fit Cab & Chassis truck.

---tab Shipping & Returns---

Fast Shipping Policy

Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy

Easy Return Policy

Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

---tab Description---

Combining an EGR delete with a DPF delete comprehensively optimizes your 2011-2016 LML 6.6L Duramax diesel engine performance by eliminating two major restrictive emissions systems. This modification significantly improves power, efficiency, and engine longevity while reducing maintenance needs.

LML EGR&DPF Delete Kit Key Features

Power Increase

  • Removes exhaust backpressure from DPF, allowing turbo to spool faster
  • Eliminates EGR’s recirculated hot gases, reducing intake air temperatures
  • Typical gains: 15-30% more horsepower/torque (varies by tune)

Improved Engine Health

  • Prevents EGR soot buildup in intake manifold and valves
  • Stops DPF-related regen cycles that dilute engine oil with fuel
  • Reduces carbon deposits in combustion chambers

Enhanced Fuel Economy

  • No DPF regens wasting fuel (up to 2-3 MPG improvement)
  • Cleaner combustion without EGR’s oxygen-depleted air

Simplified Maintenance

  • Eliminates DPF filter replacements ($1,000+ savings)
  • No EGR valve/cooler failures to repair
  • Reduces oil change frequency (no soot contamination)

Thermal Management

  • Lower EGTs (exhaust gas temps) without EGR’s hot gas reintroduction
  • Reduced risk of turbo overheating during heavy loads

Specification

Exhaust Material T-409 Stainless Steel, it is magnetic.
Thickness 2mm thick for long-lasting durability and heat resistance.
Inlet Diameter  4.0"/5.0‘’
mandrel-bent construction Maximum flow efficiency, helping your diesel breathe easier

 

Installation

 2011-2016 LML 6.6L Duramax EGR Delete Instruction

 2011-2016 LML 6.6L Duramax DPF Delete Instruction

Tuner Required for Installation

Installing a LML 6.6L Duramx delete pipe requires more than just swapping out hardware. When removing of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting. Looking for a complete LML delete solution? Check out our full LML Delete Kit here.

---tab How to Choose---

How to Choose DPF Delete?

4” vs 5” Straight Pipe Comparison

When choosing a LML 6.6L Duramx delete pipe, the most common options are 4-inch and 5-inch straight pipes. The 4-inch straight pipe delivers a tighter, raspier exhaust note—especially noticeable at lower RPMs—making it ideal for daily driving or mildly tuned setups where excessive drone is undesirable. In contrast, the 5 inch straight pipe LML 6.6L Duramx offers a deeper, more refined tone with less high-pitch resonance. It excels in high-output builds and towing scenarios, where increased exhaust flow is beneficial.

Driver feedback suggests:

  • 4”straight pipe is great for stock-to-lightly-modded trucks and a quieter cabin
  • 5” straight pipe is perfect for aggressive builds, deeper tone lovers, or anyone maximizing exhaust performance

Different Types of DPF Delete

DPF Race Delete

  • Only removes the DPF (keeps stock downpipe)
  • Minimal performance gain but cheapest option
  • Best for budget-focused or emissions-testing avoidance

Downpipe-Back Delete

  • Replaces exhaust from the turbo downpipe backward
  • Improves mid-range power and throttle response
  • Good for street builds keeping stock turbo

Turbo Back Delete

  • Full system replacement from turbo outlet
  • Includes high-flow downpipe for maximum efficiency
  • Reduces turbo lag and boosts top-end power
  • Top choice for tuned/high-performance engines

Dual Exit (5" only)

  • Splits into dual exhaust paths
  • Enhances cooling and flow for extreme applications
  • Used in heavy towing or competition setups

Muffler vs. No Muffler

With Muffler

  • Tames exhaust noise for daily driving
  • Slight power restriction (~5-10HP)
  • More likely to comply with local noise laws

Straight Pipe (No Muffler)

  • Loud, aggressive exhaust note
  • Unrestricted flow for max horsepower
  • Often illegal for street use (noise/emissions)
  • Reserved for off-road/race applications

---tab Fitment---

  • 2011-2015 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • 2015.5-2016 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • Does NOT fit Cab & Chassis truck.

---tab Shipping & Returns---

Fast Shipping Policy

Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy

Easy Return Policy

Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

Select Year
Select EGR
Select DPF
From $108.50

Original: $309.99

-65%
EGR/DPF Delete 2011-2016 LML 6.6L Duramax All-in-One Kit

$309.99

$108.50

Description

---tab Description---

Combining an EGR delete with a DPF delete comprehensively optimizes your 2011-2016 LML 6.6L Duramax diesel engine performance by eliminating two major restrictive emissions systems. This modification significantly improves power, efficiency, and engine longevity while reducing maintenance needs.

LML EGR&DPF Delete Kit Key Features

Power Increase

  • Removes exhaust backpressure from DPF, allowing turbo to spool faster
  • Eliminates EGR’s recirculated hot gases, reducing intake air temperatures
  • Typical gains: 15-30% more horsepower/torque (varies by tune)

Improved Engine Health

  • Prevents EGR soot buildup in intake manifold and valves
  • Stops DPF-related regen cycles that dilute engine oil with fuel
  • Reduces carbon deposits in combustion chambers

Enhanced Fuel Economy

  • No DPF regens wasting fuel (up to 2-3 MPG improvement)
  • Cleaner combustion without EGR’s oxygen-depleted air

Simplified Maintenance

  • Eliminates DPF filter replacements ($1,000+ savings)
  • No EGR valve/cooler failures to repair
  • Reduces oil change frequency (no soot contamination)

Thermal Management

  • Lower EGTs (exhaust gas temps) without EGR’s hot gas reintroduction
  • Reduced risk of turbo overheating during heavy loads

Specification

Exhaust Material T-409 Stainless Steel, it is magnetic.
Thickness 2mm thick for long-lasting durability and heat resistance.
Inlet Diameter  4.0"/5.0‘’
mandrel-bent construction Maximum flow efficiency, helping your diesel breathe easier

 

Installation

 2011-2016 LML 6.6L Duramax EGR Delete Instruction

 2011-2016 LML 6.6L Duramax DPF Delete Instruction

Tuner Required for Installation

Installing a LML 6.6L Duramx delete pipe requires more than just swapping out hardware. When removing of the DPF, CAT, SCR, and/or DOC involves removing and eliminating emission related sensors. A DPF delete capable tuner is required to prevent any check engine light or diagnostic trouble codes from setting. Looking for a complete LML delete solution? Check out our full LML Delete Kit here.

---tab How to Choose---

How to Choose DPF Delete?

4” vs 5” Straight Pipe Comparison

When choosing a LML 6.6L Duramx delete pipe, the most common options are 4-inch and 5-inch straight pipes. The 4-inch straight pipe delivers a tighter, raspier exhaust note—especially noticeable at lower RPMs—making it ideal for daily driving or mildly tuned setups where excessive drone is undesirable. In contrast, the 5 inch straight pipe LML 6.6L Duramx offers a deeper, more refined tone with less high-pitch resonance. It excels in high-output builds and towing scenarios, where increased exhaust flow is beneficial.

Driver feedback suggests:

  • 4”straight pipe is great for stock-to-lightly-modded trucks and a quieter cabin
  • 5” straight pipe is perfect for aggressive builds, deeper tone lovers, or anyone maximizing exhaust performance

Different Types of DPF Delete

DPF Race Delete

  • Only removes the DPF (keeps stock downpipe)
  • Minimal performance gain but cheapest option
  • Best for budget-focused or emissions-testing avoidance

Downpipe-Back Delete

  • Replaces exhaust from the turbo downpipe backward
  • Improves mid-range power and throttle response
  • Good for street builds keeping stock turbo

Turbo Back Delete

  • Full system replacement from turbo outlet
  • Includes high-flow downpipe for maximum efficiency
  • Reduces turbo lag and boosts top-end power
  • Top choice for tuned/high-performance engines

Dual Exit (5" only)

  • Splits into dual exhaust paths
  • Enhances cooling and flow for extreme applications
  • Used in heavy towing or competition setups

Muffler vs. No Muffler

With Muffler

  • Tames exhaust noise for daily driving
  • Slight power restriction (~5-10HP)
  • More likely to comply with local noise laws

Straight Pipe (No Muffler)

  • Loud, aggressive exhaust note
  • Unrestricted flow for max horsepower
  • Often illegal for street use (noise/emissions)
  • Reserved for off-road/race applications

---tab Fitment---

  • 2011-2015 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • 2015.5-2016 Chevy / GMC Duramax Diesel LML. Silverado and Sierra pickup trucks. 
  • Does NOT fit Cab & Chassis truck.

---tab Shipping & Returns---

Fast Shipping Policy

Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy

Easy Return Policy

Every order comes with a 14-day free return, which means you don't have to pay for a return slip. Click for Return Policy

EGR/DPF Delete 2011-2016 LML 6.6L Duramax All-in-One Kit | SPELAB